These are the step by step instructions on how to flash stock ROM on Android Smartphone or Tablet using Phoenix USB Pro on Windows Computer.
Before proceeding to flash stock firmware using Phoenix USB Pro, it is recommended to follow the below mentioned preparation steps for smoother flashing process.
- Make a backup of your important data to a safe place, as flashing firmware wipes all the data and settings.
- Make sure that your Android phone or tablet is charged to at least 50-60% before proceeding to flash the firmware.
How to Flash Stock ROM using Phoenix USB Pro
Step 1: Download and install the required Android USB Drivers for your phone on your computer. If you already have the USB drivers installed, then you can skip this step.
Step 2: Download and extract Android Stock Firmware for your smartphone or tablet from here to your computer.
Step 3: Download and install Phoenix USB Pro Tool on your computer.
Step 4: Once installed, open the “PhoenixUSBPro.exe” file to launch the Phoenix USB Pro Tool on your computer.
Step 5: Once Phoenix USB Pro launches, click on the “Image” button and select the .img firmware file.
Step 6: Now click on the “Start” button.
Step 7: Now, you will see a Big Green Tick Mark, which means everything is ready to flash the firmware.
Step 8: Now Power off your phone and press and hold the Volume Down button and connect it to your computer using USB Cable.
Step 9: Now, while holding the Volume Down button, press the Power button three times, then release the Volume Down button.
Step 10: Once the Phoenix USB Pro detects your device, the flashing process will begin automatically.
Step 11: Once the flashing process is successful, you’ll see the below screen.
Step 12: Now close the Phoenix USB Pro flash tool and disconnect your device from the computer and reboot it.
Congratulations, now you have successfully flashed Stock ROM firmware using Phoenix USB Pro on Android Smartphone or Tablet.