This page shows a step-by-step guide to flash stock firmware on any Huawei Smartphone or tablet using Card update method.
Before we proceed with the flashing process, it is recommended to follow the below preparation steps for smoother flashing process.
- It is recommended to take a backup of your important data to a safe place.
- Make sure your phone or tablet is sufficiently charged. It is recommended to have at least 60-70 percent battery juice before flashing firmware.
Flash Stock ROM on Huawei Smartphone (Card Update Method)
Step 1: Download and install the Huawei USB Driver on your computer. If you already have Huawei USB Drivers installed, then skip this step.
Step 2: Download and extract the Huawei Stock ROM for your phone from here. After extracting, you will see the files, as shown in the image below.
Step 3: Connect your phone to the computer using USB cable and create a new folder on your microSD card and rename it to “dload“.
Step 4: Now, copy “UPDATE.APP” and paste it inside the “dload” folder on your microSD card.
Step 5: Now, Power off your Phone.
Step 6: Now press Volume Up, Volume Down and Power buttons simultaneously together for 5-8 seconds until the update process starts automatically.
Step 7: Now, the update process should start, and it might take about 5-10 minutes to complete.
Step 8: Once the update process is successful, your phone will reboot automatically.
Congratulations! Now you have successfully flashed firmware on your Huawei phone or tablet.